Speco Technologies CVC5715DNV Bedienerhandbuch

INSTRUCTIONMANUALIntense-IR CameraCVC5715DNVCVC5715DNVW

CVC5715DNVCVC5715DNVW600TV LinesDC Auto Iris Varifocal Lens(4mm-9mm)True Day/Night CapabilityICR-IR Cut Filter Removable850nm IR LEDs * 14pcs IR LED&

CAMERA INSTALLATION1) CVC5715DNV, CVC5715DNVW107.63”4.64”7.48”2.87”2.71”2.59”2.71” dia

1. Type A, Type B, Type C of OSD button could be used when it needs to OSD control.2. Type D is extra Option (wired Remote controll

●12

13

14

Menu items can be selected by using the OSD buttons of the camera1. Press the Set Up button.* The Set Up menu will be displayed on the monitor.2. Move

3. Change menu settings using the Left or Right button.* Available values or Status are displayed by pressing the Left or Right buttons. Press the b

3. Press the RETURN to return to the SETUP menu.NOTE* When DC is selected, the brightness can be adjusted. The brightness controlrange is 1 ~ 100.Lens

EXPOSURESENS-UPSHUTTERAGCSENS-UPBLCD-WDRRETURNSENS-UPRETURNAUTOMIDDLEAUTOOFFOFFRETx 4NOTE*Shutter: Select Shutter using the Up or Down button, you can

◑ Contents ... 1◑ Precautions ... 2, 3◑ Safety Instru

* OFF: BLC function does not operate.* BLC: Select LOW/MID/HIGHUser can select and define a specific area in scene and view the area clearly.Press the

* HSBLE: HSBLC function is especially effective for reading car number plates at the night time.You can select and define the required observation are

* D-WDR: This camera which is using 3D-DNR DSP provides intelligent light level control to overcome evenstrong backlight conditions.→OFF: D-WDR functi

White BalanceThe White Balance function is used to control the “on-screen” colors.1. Move the arrow indicator to WHITE BAL on the SETUP menu screen us

Day / NightPicture can be displayed in either colour of black and white.1. Select DAY / NIGHT using the Up or Down button on the SETUP menu screen.2.

AREASMART IR ONSMART IR OFFSIZEIR SMARTGAINAREARETURN 10RET→AUTO: The mode will automatically switches to COLOR in normal conditio

3DNR is used to reduce the level of background noise in a low luminance environment.1. Move the arrow indicator to 3DNR by using the Up and Down butto

SpecialWhen the SETUP menu screen is displayed, select SPECIAL using the Up and Down buttons.Select one of the mode using the Up and Down button.1. CA

1-3) Press the SETUP button.CAMERA TITLECAMERA TITLE0123456789ABC DEFGH I J KLMN OPQR STU VWXYZ▷  → ← ↑ ↓ ( ) -ㅡ _ □ / = & :

NOTE* In cases where the wrong Camera ID has been input...Move the cursor to CLR and press SETUP button to erase characters from left toright, an

Only use the camera under conditionswhere temperatures are between -10°C and +50°C. Be especially careful to provide ventilation when operating under

③Select a new position by using the fourdirectional button, Press the SET button toconfirm the position.CAM12. D - EFFECTMove the cursor to D-EFFECT

2-2) D - ZOOM: Digital zoom available, range x1 ~ x32.PAN : The pan range can be controlled between -10 ~ + 100TILT : The tilt range can be controlled

2-3) GAMMA : Desired gamma values can be adjusted between 0.05 ~ 1.00.2-4) NEG. IMAGE :ON : Activates negative image just like filmOFF : Normal image2

4. PRIVACYHide an area you want to hide on the screen.4-1). When the SPECIAL menu screen is displayed, press the Up and Down buttons to set to PRIVACY

③Move the arrow indicator to WIDTH to make desired width of cells to increase or decrease by using the Left / Right button between the level 0 ~ 100.

ADJUST1. When the SETUP menu screen is displayed, select ADJUST using the Up and Down buttons.SETUP1.LENS2.EXPOSURE3.WHITE BAL4.DAY / NIGHT5.3DNR6.SPE

RESETResets the camera settings to the factory defaults.EXITPress the SET button in the EXIT menu to save the current settings and exit the SETUP menu

Trouble ShootingNorthing appears onthe screen.☞Check the power cable, power supply output and videoconnection between the camera and monitor.☞A

37

- MEMO -38

CAUTIONRISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER(OR BACK).

- MEMO -39

200 New HighwayAmityville, NY 11701631-957-87001 800 645 5516www.specotech.com

◑ ◑ There are no user serviceable parts inside◑ Do not disassemble this camera other than to make initial adjustments◑ Use a UL approved regulated 2

Package ContentsPlease make sure that the following items are included in the Package:1) CVC5715DNV, CVC5715DNVW • 1 Video Test Connector, Power J

CAMERA INSTALLATIONCompatibility1) CVC5715DNV, CVC5715DNVWINTCM

CAMERA INSTALLATION1. CVC5715DNV, CVC5715DNVWCAMERWALLA ASSEMBLYHEXAGON SOCKET SCREW M4X7, 4EATAPPING SCREW 4X20, 4EA 2AXIS BRACKET ADAPTOR8